AWS A5.16 ERTi-1 ERTi-7 2.0mm 2.4mm 3.2mm Titanium Welding Wire For Biomedical

Introduction

Gr1 titanium welding wire is a commercially pure titanium wire that contains 99%(min) titanium. It is the softest and most ductile grade of titanium, which is easily formed into different shapes and sizes. This pure titanium wire is typically produced by a cold drawing process, which involves pulling the wire through a series of dies to reduce its diameter.

It is one of the very important materials in the chemical industry. Its excellent corrosion resistance and high-temperature stability can meet the special requirements of chemical equipment.

Specification

Chemical composition

Mechanical Properties

Product photo

Application

1. It is used to manufacture chemical equipment, such as reactors, heaters, heat exchangers, storage tanks, etc. These devices are often exposed to high temperature, high pressure, and corrosive environments, so grade 1 titanium wire with good corrosion resistance and high-temperature stability is required.

2. It is used for connection and maintenance of chemical equipment. Due to the difficulty of welding titanium metal, it is necessary to use high-purity titanium welding wire for welding GR2 titanium equipment.

3. The application of titanium alloys in the biomedical field is increasingly prevalent, with titanium welding wire being utilised in the manufacture of medical devices such as orthopaedic implants, dental prostheses, and cardiovascular devices.

FRQ

Commercial CE SAA ROHS Certificate Outdoor IP65 Waterproof 20W 30W 50W 100W 200W 12V LED Flood Lights

Q1. Can I have a sample order for LED light?

A: Yes, we welcome sample orders to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: 3-5 days for Sample preparation,8-10 working days for mass production.

Q3. Do you have any MOQ limit for LED light orders?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods, and how long does it take to arrive?

A: Ship by DHL, UPS, FedEx, or TNT. It takes 3-5 days to arrive. Airline and sea shipping are also optional.

Q5. How do I proceed with an order for an LED light?

A: Firstly, let us know your requirements or application.

Secondly, we will quote according to your requirements or our suggestions.

Thirdly, the customer confirms the samples and places a deposit for a formal order.

Fourthly, we arrange the production.

Q6. Is it OK to print my logo on an LED light product?

A: Yes. Please inform us formally before our production.

Q7: Do you offer a guarantee for the products?

A: Yes, we offer 5 years warranty on our products.

Q8: How do you deal with the fault?

A: Firstly, our products are produced in a strict quality control system, and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new orders for small quantities. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to the real situation.